Ardex - Floor Heating Membrane Flexbone 1500W 39" x 41' (134.5 sqft) (Pack of 40)
Ardex's floor heating membrane & guides — brings gentle, even warmth to the floor above it — pair with a compatible thermostat.
Buy now
$9.76 /sq ftor 4 payments of about $328.23 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Product details
Ardex's floor heating membrane & guides — brings gentle, even warmth to the floor above it — pair with a compatible thermostat.
ARDEX FLEXBONE HEAT is an electrical in-floor heating system for use with tile or stone. The unique crossbones pattern provides less touch points between the cables and the membrane, and less air space within the mat structure, providing faster and more efficient heating of the floor covering.
The unique design also allows for easy prefilling in just one pass with ARDEX high-performance mortars, or approved ARDEX Self-Leveling Underlayments can be used for easier, faster prefilling to fully encase the heat cables. ARDEX FLEXBONE HEAT can be used as a waterproofing layer in bathrooms and other wet areas.
Ideal for large-format tile and stone installations, ARDEX FLEXBONE HEAT is also an uncoupling membrane that helps to prevent grout joint and tile damage from underlying substrate movements.
Key features
- 3-in-1 In-Floor Heating, Uncoupling and Waterproofing
- Uncoupling: protects tile and grout joints from shear movement in the substrate
- Waterproofing: protection for use in bathrooms, laundry rooms and other wet areas
- Maximum heat efficiency, more heat comfort with less energy usage
- Minimal roll memory – rolls out flat every time
- High quality heating cables – more efficient, easier to install, less cable required
- 0.25" overall thickness
- Covers 134.5 sq ft per box
- Brand
- Ardex
- Collection
- Flexbone
- Browse category
- Underlayment & Heating
- Browse sub-category
- Floor Heating Membrane & Guides
- Thickness
- 0.25
- Width
- 38.5
- Coverage
- 134.5 sq ft / box
- Weight
- 39.8 lb
- SKU
- 30077
- Pieces per box
- 40
- Indoor use
- Yes
- Voltage
- 120 and 240
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.