Barricade - Insulating Underlayment Thermal Shield 23-1/4" x 47-1/4" - 25 mm (80 sqft)
Barricade's membranes & underlayments — quiets footsteps and evens out the subfloor beneath your new floor.
Buy now
$2.89 /sq ftor 4 payments of about $57.81 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Product details
Barricade's membranes & underlayments — quiets footsteps and evens out the subfloor beneath your new floor.
BARRICADE Thermal Shield is the most premium subfloor. With an R-value of 4.1, BARRICADE Thermal Shield provides one of the highest R-values in the market, meaning maximum warmth and comfort for your family. It’s specially engineered with a high-density inorganic EPS foam that’s durable enough to hold up to 3,650 pounds per square foot but still weighs less than 2 pounds per panel!
Plus BARRICADE Thermal Shield is very easy to install. It can be cut with a knife – no power tools required! Plus the tongue and groove fit together with no gap so no taping is needed! BARRICADE Thermal Shield provides the most insulating power in a subfloor yet. It is specially engineered with 100% inorganic EPS foam that is lightweight and doesn’t require power tools to cut it, making it even easier to install.
Key features
- Strong enough to support up to 3,650 lbs/sq.ft. (1,659 kg/sq. ft.)
- Helps promote healthy indoor air quality
- No power tools required and can be cut with a utility knife
- Specially designed to protect hard surface floors (LVT/LVP, laminate, engineered hardwood)
- Limited 25 year warranty
- Lightweight (1.6 lbs/0.7 kg) and convenient 23.25" x 47.25" size
- Piece size: 23.25" × 47.25" (1" thick)
- Material: EPS Foam
- Brand
- Barricade
- Collection
- Barricade Therma Shield
- Browse category
- Underlayment & Heating
- Browse sub-category
- Membranes & Underlayments
- Thickness
- 1
- Width
- 23.25
- Length
- 47.25
- Warranty
- 25
- Coverage
- 80 sq ft / box
- Weight
- 1.6 lb
- SKU
- FG10044
- Material
- EPS Foam
- Pieces per box
- 1
- Use for
- Hard-surface floors such as luxury-vinyl tile/panel (LVT/LVP), laminate, engineered hardwood
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.