SKU HS14252 colours in Bulldog
Bosch · Bulldog
Bosch Chisel Bulldog Steel for SDS-plus Hammer 1-1/2" x 10"
$42.26/ each
Bosch floor stripper blades & shanks. The right piece to finish your installation.
Quantity
1
× $42.26 / eachProduct details
Bosch floor stripper blades & shanks. The right piece to finish your installation.
Pair it with the matching flooring line for a seamless, factory-finished result.
Glue-down
- Brand
- Bosch
- Collection
- Bulldog
- Browse category
- Floor Stripper Blades & Shanks
- Browse sub-category
- Floor Stripper Blades & Shanks
- Width
- 1.5
- Length
- 10
- SKU
- HS1425
- Material
- Steel
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No documents available for this product.
No reviews yet for this product. Be the first to review it after your purchase.
You might also like
Bosch
Bosch Scalding Chisel Steel for SDS-max Hammer 2" x 14"
$44.30 /each
Crain
Crain Stripper Blades 3-15/16" x 9/16" x 4" for no. 350-360 (Pack of 100)
$81.78 /each
Rubi
Rubi Chisel Protector 23mm x 13mm
$4.79 /each
Rubi
Rubi Cold Chisels 1/2" x 1-1/16" x 2-3/8" x 10"
$42.53 /each
Rubi
Rubi Cold Chisels 1/2" x 7/8" x 10"
$28.79 /each