Comfort-One - ProMelt Cable Heating Cable 208V 317 Linear Feet (105 sqft)
The Heating Cables from Comfort-One. A quality pick to round out your flooring job.
Product details
The Heating Cables from Comfort-One. A quality pick to round out your flooring job.
ProMelt® cable consists of a series resistance heating cable and a single power lead for easy single-point connection. It is used to melt ice or snow from an exterior surface and is designed for outdoor use only by embedding in concrete, pavers, asphalt, or sand. ProMelt cable is flexible and an ideal choice for curves, stairs and free-form shapes. Spacing can be at 3 in. or 4 in.
depending on heat loss calculations (3 in. OC for 50 Watts/ft2 and output or 4 in. OC for 38 Watts/ft2). Secure to existing concrete with CableStrap and to rebar and rewire with ties. Available in several lengths and in 120, 208, 240, and 277 VAC.
- Brand
- Comfort-One
- Browse category
- Underlayment & Heating
- Browse sub-category
- Heating Cables
- SKU
- SC50208080
- Linear feet
- 317
- Voltage
- 208 V
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.