Comfort-One - TapeMat 2’x30’ 120V 60 Sq.Ft
The Floor Heating Membrane & Guides from Comfort-One — warms the floor from below for comfort you can feel underfoot.
Product details
The Floor Heating Membrane & Guides from Comfort-One — warms the floor from below for comfort you can feel underfoot.
SunTouch® TapeMat® electric floor heating mats are a series resistance heating cable assembly designed for installation over plywood, backer board, or concrete slab (according to ANSI or TCNA guidelines), and then embedded in 3/8 in. (9.5 mm) or greater self-leveling or polymer-modified thin-set mortar. The SunTouch TapeMat open-weave design with peel-and-stick tape provides fast and easy installation on subfloors.
TapeMats add only 1/8 in. thickness to a typical tile floor installation and can be easily adjusted to accommodate curves, angles, and cut-outs. A complex wire construction with two parallel heating elements and a patented helical twist prevents electromagnet field (EMF) radiation. TapeMats must be controlled by a SunStat® floor sensing thermostat (sold separately). Available in 2 ft. and 3 ft.
widths with various lengths, and voltage options of 120 and 240 VAC.
- Brand
- Comfort-One
- Browse category
- Underlayment & Heating
- Browse sub-category
- Floor Heating Membrane & Guides
- SKU
- WW12003024
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.