Core Flooring - Carpet Stair Nose Vinyl with 3/16" (4.8 mm) Carpet Insert #34 Burnt Umber with Safety Walk Grit Tape 1" #C2024 Safety Yellow - 1-1/2" (38.1 mm) x 2-1/4" x 12'
The Carpet Moldings & Trims from Core Flooring in Burnt Umber — bridges thresholds and covers expansion gaps for a polished result.
Product details
The Carpet Moldings & Trims from Core Flooring in Burnt Umber — bridges thresholds and covers expansion gaps for a polished result.
Heavy Duty nosing for stairs and other height changes, with carpet insert top surface; can be equipped with 1" Abrasive insert. CORE Vinyl Nosings are designed to provide an attractive and functional edge to steps of all kinds. CORE Vinyl Nosings must be site conditioned at room temperature (18ºC to 24ºC) for 24 hours prior to, during and after installation. CORE Vinyl Nosings are not recommended for exterior use.
- Brand
- Core Flooring
- Colour
- Burnt Umber
- Browse category
- Vinyl
- Browse sub-category
- Carpet Moldings & Trims
- Width
- 2.25
- Length
- 144
- SKU
- 7534-C2024
- Insert type
- Grit Tape
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.