Core Flooring - Carpet Stair Nose Vinyl with 3/16" (4.8 mm) Carpet Insert #48 Cinnamon - 1-1/2" (38.1 mm) x 2-1/4" x 12'
The Carpet Moldings & Trims from Core Flooring in Cinnamond — bridges thresholds and covers expansion gaps for a polished result.
Free sample · $9.95 flat shipping, up to 3
Product details
The Carpet Moldings & Trims from Core Flooring in Cinnamond — bridges thresholds and covers expansion gaps for a polished result.
Heavy Duty nosing for stairs and other height changes, with carpet insert top surface; can be equipped with 1" Abrasive insert. CORE Vinyl Nosings are designed to provide an attractive and functional edge to steps of all kinds. CORE Vinyl Nosings must be site conditioned at room temperature (18ºC to 24ºC) for 24 hours prior to, during and after installation. CORE Vinyl Nosings are not recommended for exterior use.
- Brand
- Core Flooring
- Colour
- Cinnamond
- Browse category
- Vinyl
- Browse sub-category
- Carpet Moldings & Trims
- Width
- 2.25
- Length
- 144
- SKU
- 7548
- Material
- Thermoplastic Vinyl
- Pieces per box
- 5.000000
- Grade level
- Allowed
- Hardness
- 75 Shore A
- Lightfastness
- Slight fading can occur over time from UV exposure
- Recycled content
- none
- Commercial warranty (years)
- 1
- Flame spread
- ASTM E 84, Class B
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.