Core Flooring - Medium Vinyl Nosing #34 Burnt Umber - 3/16" (4.8 mm) x 1-1/2" x 12'
Core Flooring vinyl stair nose in Burnt Umber — matches your floor to trim out doorways, edges and stairs.
Product details
Core Flooring vinyl stair nose in Burnt Umber — matches your floor to trim out doorways, edges and stairs.
Medium duty nosing for stairs and other height changes, with recessed pocket for insertion of LVT/VCT/Lino. CORE Vinyl Nosings are designed to provide an attractive and functional edge to steps of all kinds. CORE Vinyl Nosings must be site conditioned at room temperature (18ºC to 24ºC) for 24 hours prior to, during and after installation. Not recommend for exterior use.
- Brand
- Core Flooring
- Colour
- Burnt Umber
- Browse category
- Vinyl
- Browse sub-category
- Vinyl Stair Nose
- Width
- 1.5
- Length
- 144
- SKU
- 3834
- Material
- Thermoplastic Vinyl
- Pieces per box
- 6.000000
- Grade level
- Allowed
- Lightfastness
- Slight fading can occur over time from UV exposure
- Commercial warranty (years)
- 1
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.