Core Flooring - Tile Reducer Vinyl #10 White - 1/2" (12.5 mm) x 1-3/4" x 12'
Core Flooring tile edge trims in White. The right piece to finish your installation.
Product details
Core Flooring tile edge trims in White. The right piece to finish your installation.
Reducer to finish off tile or other hard surfaces to flat surfaces. CORE Vinyl Reducers are designed to provide an attractive and functional transition between different types and heights of flooring. CORE Vinyl Reducers and adhesives must be site conditioned at room temperature for 24 hours prior to, during, and after the installation. Room temperature must be maintained between 18ºC and 24ºC.
In rooms that are exposed to intense or direct sunlight, the product must be protected during the conditioning, installation, and adhesive curing periods, by covering windows that face the sun. . CORE Vinyl Reducers are not recommended for exterior use. Exposure to excessive UV rays and outdoor weather conditions can result in fading, color variation, and premature aging.
- Brand
- Core Flooring
- Collection
- Trims
- Colour
- White
- Browse category
- Vinyl
- Browse sub-category
- Tile Edge Trims
- Width
- 1.75
- Length
- 144
- SKU
- 5510
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.