Crain - Deluxe Door Pin Tool
Crain's hammering tools. A dependable choice to complete your flooring project.
Product details
Crain's hammering tools. A dependable choice to complete your flooring project.
This wedge-shaped tool has a forked-shaped edge on one end with a capture spring that holds the greasy pin on the fork, preventing it from falling on the carpet below. On the other end, the tool has a solid steel pin. If the bottom of the hinge is open, simply insert the pin and tap it upwards to lift the head. If the hinge is not open, insert the fork-shaped edge under the pin and hammer to wedge it up.
Once the pin is raised, the fork can be inserted under the head to lift the pin up and out. The capture spring holds it on the fork as it is removed. The nickel-plated steel body withstands hammering.
Key features
- Wedge-shaped tool with forked shaped edge and capture spring to hold the pin
- Capture spring holds the greasy pin on the fork so it won’t fall on the carpet
- For hinges that are open at the bottom, insert the pin end and tap to force the pin up
- Otherwise, insert the fork-shaped edge under the pin and hammer wedge up
- Material: nickel-plated steel
- Brand
- Crain
- Browse category
- Tools
- Browse sub-category
- Hammering Tools
- SKU
- 363
- Material
- nickel-plated steel
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No documents available for this product.
No reviews yet for this product. Be the first to review it after your purchase.