Crain - Door Pin Tool
The Hammering Tools from Crain. A quality pick to round out your flooring job.
Product details
The Hammering Tools from Crain. A quality pick to round out your flooring job.
This tool has a wedge with forked-shaped edge on one end and a solid steel pin on the other for removing door pins from types of hinge assemblies. If the bottom of the hinge is open, simply insert the pin and tap it upwards to lift the head. If it is not open, insert the fork-shaped edge under the pin and hammer to wedge it up.
Once the pin is raised, the fork can be used under the head to lift the pin up and out of the hinge. The nickel-plated steel body withstands hammering.
Key features
- Steel body includes a wedge with forked edge on one end and a push pin on the other
- For hinges that are open at the bottom, insert the pin and tap to push the pin up
- Otherwise, insert the fork-shaped edge under the pin and hammer to lift the pin
- Once lifted, the fork is used to lift the pin all the way out
- Material: nickel-plated steel
- Brand
- Crain
- Browse category
- Tools
- Browse sub-category
- Hammering Tools
- SKU
- 362
- Material
- nickel-plated steel
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No documents available for this product.
No reviews yet for this product. Be the first to review it after your purchase.