Crain - Quarter Moon Knife
Crain knives. The right piece to finish your installation.
Product details
Crain knives. The right piece to finish your installation.
This knife is used to trim excess welding rod from the seam area after cooling to make the seam area flush with the rest of the floor. It is used in a two-step process in conjunction with the No. 986 Trim Guide. First, insert the trim guide beneath the knife and trim off the bulk of the material on a first pass. Afterwards, remove the trim guide and make a second pass with the knife only.
The fine cut of the second pass finishes flush with the surrounding floor. The knife comes with a protective pouch. Blade is resharpenable. Trim guide not included.
Key features
- Trims excess welding rod from the seam area after cooling making it flush with the floor
- Used in a two-step trimming process with the No. 986 Trim Guide
- Use the trim guide under the blade on first pass, then remove the trim guide on second pass
- Knife is resharpenable and comes with protective pouch
- Brand
- Crain
- Browse category
- Tools
- Browse sub-category
- Knives
- SKU
- 985
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No documents available for this product.
No reviews yet for this product. Be the first to review it after your purchase.