Custom Building Products - Polyblend HP High Performance Fine Aggregate Grout #381 Bright White 10 lb
The Grout from Custom Building Products in Bright White — the mortar and setting base that keeps your installation solid for years.
Product details
The Grout from Custom Building Products in Bright White — the mortar and setting base that keeps your installation solid for years.
Polyblend HP High Performance Fine Aggregate Grout is a new high performance cement grout that has the added benefit of fine aggregate sand that allows for use in the smallest of grout joints. Polyblend HP meets ANSI A118.7 high performance requirements and produces hard, dense joints that resist shrinking, cracking, and wear.
Polyblend HP has all the value-added features of the Polyblend family: excellent performance, enhanced finished color with better color consistency. The fine aggregate sand fits into the smallest grout joints and eliminates the need for non-sanded grout for most installations.
Polyblend HP High Performance Fine Aggregate Grout accommodates up to 3/4" (19 mm) joints for interior or exterior installations, including floors, countertops, walls, ceilings, showers, fountains, and pools.
Key features
- One grout for all joint sizes up to 3/4”
- Advanced color consistency
- Improved resistance to efflorescence
- Meets ANSI 118.7 High Performance Grout Standard without additive
- Easy to use – Just mix with water
- Polymer fortified for hard, durable, professional results
- Water-resistant — suitable for kitchens and baths
- Rated for residential and commercial use
- Brand
- Custom Building Products
- Collection
- Polyblend HP High Performance Fine Aggregate Grout
- Colour
- Bright White
- Browse category
- Setting Materials
- Browse sub-category
- Grout
- Installation
- Residential and commercial
- Weight
- 10 lb
- SKU
- CPBHPG38110
- Pieces per box
- 1
- Indoor use
- Yes
- Outdoor use
- Yes
- Use on
- Floor, walls, countertops, ceilings
- Use for
- Tub surrounds, showers, high traffic areas, submerged conditions (swimming pools, spas, water features and fountains)
- Water resistant
- Yes
- Cure time
- 16 hours light traffic, 72 hours for full cure
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.