Custom Building Products - Rapid Setting Crack Prevention Large Format Tile Mortar MegaLite RS Ultimate Gray 30 lb
Custom Building Products' mortars in Gray — the mortar and setting base that keeps your installation solid for years.
Free sample · $9.95 flat shipping, up to 3
Product details
Custom Building Products' mortars in Gray — the mortar and setting base that keeps your installation solid for years.
A premium one part formula with the high, fast bond strengths and flexibility to withstand horizontal movement to isolate substrate cracks. For time-critical commercial and residential installations under the most demanding requirements, capable of thin-set or medium bed application up to 3/4" (19 mm) thick on horizontal surfaces after beat in.
Non-slump, medium-bed features provide the ultimate support for large format tile and stone. No need for two part additives to meet high bond and flexibility or compressive strength equirements. The rapid setting formula allows grouting in less than 3 hours, traffic in 4 hours. A 30 lb (13.6 kg) bag covers the same area as a 50 lb (22.68 kg) bag of traditional mortar.
Use for interior or exterior floors, countertops and walls. Formulated with recycled material contributes to LEED certification. Exceeds ANSI A118.4, A118.15 and A118.11 without the need for additives.
Key features
- Fast curing - Grout in 3 hours, open for traffic in 4 hours
- Unsurpassed bond strength and flexibility
- Non-slump for floors, sag and slip resistant for walls
- Lightweight - 30 lbs. covers the same area as 50 lbs. of traditional mortar
- 1-year warranty
- Rated for residential and commercial use
- Brand
- Custom Building Products
- Collection
- MegaLite RS Ultimate
- Colour
- Gray
- Browse category
- Tiles
- Browse sub-category
- Mortars
- Installation
- Residential & Commercial
- Warranty
- 1
- Weight
- 30 lb
- SKU
- MLRSG30
- Material
- Proprietary blend of Portland cement, inorganic aggregates, copolymers and chemicals.
- Pieces per box
- 1
- Indoor use
- Yes
- Outdoor use
- Yes
- Use with
- Vitreous, semi-vitreous or non-vitreous tile: ceramic, mosaic, quarry, cement body tile · Impervious porcelain and glass tile · Brick and Stone Veneer · Cement-based precast terrazzo · Natural stone tile
- Certifications
- ANSI A108.5, A118.4, A118.15 and A118.11 · ASTM C109, C627 · TCNA Method EJ171 · RFCI
- LEED
- Up to 2 points towards MR Credit 5, Regional Materials · Up to 2 points towards MR Credit 4, Recycled Content · Up to 1 point towards IEQ Credit 4.1, Low-Emitting Materials – Adhesives & Sealants
- Cure time
- The rapid setting formula allows grouting in less than 3 hours
- Mixing ratio
- Mix 5.75 - 6 qts (5.4 - 5.7 L) clean water per 30 lb (13.6 kg) bag of mortar
- Storage
- Protect from freezing & Store in a cool, dry area
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.