Custom Building Products - Scratch Coat Tile Mortar 50 lb
Custom Building Products mortars in Gray — the mortar and setting base that keeps your installation solid for years.
Buy now
$14.45 /sq ftor 4 payments of about $90.31 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Free sample · $9.95 flat shipping, up to 3
Product details
Custom Building Products mortars in Gray — the mortar and setting base that keeps your installation solid for years.
A thin mortar bed for use as an underlayment providing a sound, stable surface for bonding ceramic tile over Exterior Grade Plywood. Wood surfaces must be interior only and protected from moisture.
Key features
- Provides a thin, stable surface for setting ceramic tile
- Mix with water only
- Suitable Tile Types : Ceramic tile, pavers, brick, stone, terrazzo, carpet, wood, parquet, VCT, sheet vinyl flooring and laminated flooring
- Covers 25 sq ft per box
- Brand
- Custom Building Products
- Colour
- Gray
- Browse category
- Tiles
- Browse sub-category
- Mortars
- Coverage
- 25 sq ft / box
- Weight
- 50 lb
- SKU
- CSC50
- Pieces per box
- 1.000000
- Per skid
- 50.000000
- Indoor use
- Yes
- Outdoor use
- Yes
- Cure time
- 12 - 24 hours
- Mixing ratio
- Mix 3.78 L clean water to a 50 lb bag
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.