Custom Building Products - Uncoupling Membrane RedGard 39-3/8" x 98' 5" (323 sqft)
Custom Building Products uncoupling & underfloor heating membranes — warms the floor from below for comfort you can feel underfoot.
Buy now
$2.90 /sq ftor 4 payments of about $233.93 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Product details
Custom Building Products uncoupling & underfloor heating membranes — warms the floor from below for comfort you can feel underfoot.
Both a waterproof and vaporproof uncoupling membrane that can be used for crack-isolation in most tile, porcelain, or natural stone installations. It can also be applied over challenging substrates such as installation over green (young) concrete and single ply 19.2″ (49 cm) o.c. wood framed floors. When exposed to excessive substrate movement, it absorbs stress and preserves the surface and integrity of the tile.
Key features
- Helps prevent cracks in tile and grout
- Use to replace 1/4″ (6 mm) backerboard or a second layer of plywood in tile
- Use with polymer modified thin-set mortar – as recommended for bonding porcelain and other difficult to bond tiles
- Reinforced fleece bonding layer locks in mortar for a strong bond
- No fasteners required
- Mat made from 70% recycled pre-consumer waste, by weight
- Covers 323 sq ft per box
- Water-resistant — suitable for kitchens and baths
- Brand
- Custom Building Products
- Collection
- RedGard
- Browse category
- Underlayment & Heating
- Browse sub-category
- Uncoupling & Underfloor Heating Membranes
- Coverage
- 323 sq ft / box
- Weight
- 44.5 lb
- SKU
- RGM2323
- Pieces per box
- 1.000000
- Per skid
- 1.000000
- Water resistant
- Yes
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.