Custom Building Products - Unsanded Grout Polyblend Plus #11 Snow White 10 lb
The Grout from Custom Building Products in Snow White — the mortar and setting base that keeps your installation solid for years.
Buy now
$0.39 /sq ftor 4 payments of about $9.78 with Klarna or Afterpay
Subject to approval. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Product details
The Grout from Custom Building Products in Snow White — the mortar and setting base that keeps your installation solid for years.
Polyblend Plus has all of the great features of original Polyblend, plus some new value-added enhancements to improve performance, finished color, and color consistency. It is an ANSI A118.6 polymermodified, cement-based non-sanded grout designed for highly glazed or polished tile, marble and natural stone that would be scratched by sanded grouts.
This durable, non-shrinking grout accommodates joints up to 1/8" (3 mm) and can be used for interior or exterior installations, including floors, countertops, walls, ceilings, showers, fountains and pools.
Key features
- Brighter, more vivid finished color
- Enhanced color consistency
- Better resistance to efflorescence
- Easy to use – Just mix with water
- Polymer fortified for hard, durable, professional results
- Easy to use - Just mix with water
- Piece size: 9.5" × 3.25"
- Covers 100 sq ft per box
- Brand
- Custom Building Products
- Collection
- Polyblend Plus
- Colour
- Snow White
- Browse category
- Setting Materials
- Browse sub-category
- Grout
- Width
- 9.5
- Length
- 3.25
- Installation
- Residential and Commercial
- Coverage
- 100 sq ft / box
- Weight
- 11 lb
- SKU
- CPBPG1110N
- Pieces per box
- 1
- Indoor use
- Yes
- Outdoor use
- Yes
- Use on
- Floors, countertops and walls
- Use for
- Exterior Wall · Floor · Interior Wall · Commercial/Home and Office · Tub Surround · Swimming Pool · Outdoor · Shower · Countertop · Residential Indoor
- Mixing ratio
- Mix 2.9 pt (1.4 L) clean water to 10 lb (4.5 kg) grout
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.