CustomTech - Silk Patching and Finishing Compound for Concrete 10 lb
CustomTech's mortars — the mortar and setting base that keeps your installation solid for years.
Product details
CustomTech's mortars — the mortar and setting base that keeps your installation solid for years.
A fast-curing, calcium aluminate based, patching and finishing compound that provides a smooth finish to a variety of substrates prior to the installation of floor coverings. Formulated with Controlled Cure Technology, Silk helps eliminate installation problems of bond failure, crumbling, mildew and staining of resilient flooring due to free-moisture found in traditional underlayments.
Its rapid setting formula allows installation of most floor coverings in as little as 30 minutes.
Key features
- Superior mixing and handling
- Excellent for skim coat patching applications
- No additives required
- Apply from featheredge to 1″
- Install flooring in as little as 30 minutes
- Material: Calcium Aluminate
- Brand
- CustomTech
- Collection
- Silk
- Browse category
- Setting Materials
- Browse sub-category
- Mortars
- Warranty
- 101525
- Weight
- 10 lb
- SKU
- SILK10T
- Material
- Calcium Aluminate
- Outdoor use
- No
- Mixing ratio
- Mix 2.37 liters of clean, cool water with a 10 lb bag
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.