SKU AK-360
D-Cut
D-Cut - Multi-Cut Flooring Cutter for Engineered Wood, Laminate and Vinyl 14-1/8"
$2,364.97/ each
D-Cut's floor cutters — a job-site essential for a professional-looking install.
Quantity
1
× $2,364.97 / eachFree sample · $9.95 flat shipping, up to 3
Product details
D-Cut's floor cutters — a job-site essential for a professional-looking install.
Floor cutters are ideal for precision cuts with no splintering or chipping.
Key features
- Applications: Engineered Wood, Laminate and LVT Flooring
- MULTI-CUT: Straight cut, angle cut, notch cut and rip cut
- Capacity: A tungsten steel blade cuts 14-1/8” long and 5/8" (17mm) deep
- The blade can be pulled out from either side of the blade holder to make a notch cut
- A battery-powered LED belt light is equipped along the blade
- Adjustable handle length for easy operation, moving and store
Glue-down
- Brand
- D-Cut
- Browse category
- Vinyl
- Browse sub-category
- Floor Cutters
- Weight
- 59.4 lb
- SKU
- AK-360
- Use for
- Engineered Wood, Laminate and LVT Flooring
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.
You might also like
Roberts
13" Multi-Floor Cutter
$300.15 /each
Bennett
Bennett Disposable Vinyl Gloves Large (Pack of 100)
$22.79 /sq ft
Bullet Tools
Bullet Tools - Lower Replacement Blades Tungsten Steel Alloy for Bullet Cruiser (Pack of 3)
$46.75 /each
Bullet Tools
Bullet Tools RCT Magnum Shear 20"
$1,008.58 /each
Bullet Tools
Bullet Tools RCT Magnum Shear 26"
$1,700.09 /each
Bullet Tools
Bullet Tools RCT Magnum Shear 30"
$2,399.89 /each
Bullet Tools
Bullet Tools - Replacement Blade 9-1/2" for Vinyl Cutter
$121.25 /each
Bullet Tools
Bullet Tools - Replacement Blades 28 mm Tungsten Steel Alloy for Vinyl Glider (Pack of 5)
$64.80 /each