Dura - Acoustic Underlayment Duracoustic Rubber 54" x 24' - 8 mm (108 sqft)
Dura's acoustic underlayment — adds cushioning, sound-dampening and a smoother subfloor.
Buy now
$1.96 /sq ftor 4 payments of about $52.98 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Product details
Dura's acoustic underlayment — adds cushioning, sound-dampening and a smoother subfloor.
DURACOUSTIC 8 mm is acoustical underlayment and an effective solution for creating floor systems that meet stringent sound ratings in multi-floor buildings. This premium acoustic flooring underlay is for condos, hotels, commercial buildings, and private homes. DURACOUSTIC 8 mm is a versatile, multi-surface acoustical underlayment offering very high performance.
On a 6” concrete slab, the IIC is 92 with a suspended ceiling.
Key features
- Versatile Underlayment: Compatible with a variety of floor surfaces
- Environmentally Friendly: Made with 95% recycled rubber
- Superior Impact Sound Reduction: Reduces noise and prevents its spread in the room as well as its transmission through walls and floors
- Superior Durability: Protects against wear and retains its structure and acoustical value over time
- Ideal for meeting stringent sound rating requirements in hotels, condos, and commercial buildings
- Conceals minor imperfections of the subfloor
- 0.31" overall thickness
- Material: Recycled Rubber
- Brand
- Dura
- Collection
- Duracoustic
- Browse category
- Underlayment & Heating
- Browse sub-category
- Acoustic Underlayment
- Flooring type
- Engineered hardwood and Laminate · Ceramic, Natural Stone and Carpet Tile · Vinyl · Carpet
- Thickness
- 0.31
- Width
- 54
- Installation
- Glue
- Warranty
- Lifetime
- Coverage
- 108 sq ft / box
- Weight
- 65 lb
- SKU
- DU3802054
- Material
- Recycled Rubber
- Pieces per box
- 1
- Coverage (sq yd)
- 12.00
- Use on
- Walls and Floors
- Use for
- To reduce sounds · Conceals minor imperfections of the subfloor
- Use with
- For Multiple Floor Surfaces: Measuring tape, utility knife, duct tape, polyethylene foam or fiberglass board, tack glue may be needed · When Gypsum concrete is used: Gypsum concrete overlay · When Cement boards are used: 2 layers of 1/2" cement boards, 2" fiberglass tape embedded in ceramic · When Plywood id used: Adhesive, square trowel, acoustical sealant
- Traffic rating
- Heavy foot traffic
- Vapour barrier
- No
- Radiant heat compatible
- Yes
- Impact sound (IIC)
- 68
- Antimicrobial
- Yes (Mold, Mildew and Fungus growth)
- TVOC emissions
- 0.5 mg/m³ or less
- Recycled content
- 95% recycled Rubber
- Certifications
- CRI Green Label Plus
- LEED
- Contributes up to 5 Credits
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.