Dyna - Premium Performing Matte Sealer and Stone Enhancer Terraseal Matte 4300 - 946 ml
The Tile & Grout Sealers from Dyna — locks tile and stone down with a strong, reliable bond.
Free sample · $9.95 flat shipping, up to 3
Product details
The Tile & Grout Sealers from Dyna — locks tile and stone down with a strong, reliable bond.
TERRASEAL MATTE 4300 is a clear and transparent premium performance penetrating sealer specially formulated to protect, enhance the color of, and provide a protective matte finish to textured, rough, split faced, honed, sandblasted, and flame finished dimensional and natural stone surfaces, and their joints.
It can be used on natural and dimensional stone such as slate, sandstone, honed limestone, quartzite, granite, marble, serpentine, and onyx to enhance the color of, provide a matte sheen, and protect the surface against stains, dust, dirt, water, acid rain, chemical attack, mildew, fungus, UV rays, salt, oils, tar and efflorescence. Surface dirt should be removed using standard maintenance procedures.
It allows moisture vapor transmission. TERRASEAL MATTE 4300 also protects from freeze / thaw damage such as spalling, cracking and bubbling rendered by the harshest climates. It serves to densify the surface of any stone and will not peel or yellow. It can also be used on unglazed tiles, their joints, terra cotta tiles, Spanish tiles, Brazilian tiles, and terrazzo surfaces.
Key features
- Provides Color Enhancement
- Matte finish, enhances and preserves the colors of the treated surface
- Penetrates deeply for better and more durable protection against stains
- Reduces damages due to freeze-thaw cycles
- Resists all weather elements (sun, rain, frost, heat,
- Matte finish
- Brand
- Dyna
- Collection
- Terraseal Matte 4300
- Browse category
- Tiles
- Browse sub-category
- Tile & Grout Sealers
- Finish
- Matte
- SKU
- 4300-1
- Pieces per box
- 1
- Indoor use
- Yes
- Outdoor use
- Yes
- Use on
- Floors, Walls, Countertops, ceilings and Natural and Dimensional Stone such as: Slate, Sandstone, Hones Limestone, Quartzite, Granite, Marble, Serpentine and Onyx
- Use for
- May also be used as a grout release agent
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.