Johnsonite Rubber Tile Solid Color Smooth #45 Sandalwood 24" x 24"
Johnsonite Solid Color rubber flooring in Sandalwood brings quiet, slip-resistant performance built for busy commercial floors. From the Solid Color collection by Johnsonite, every detail is designed to hold up to real life.
Buy now
$22.92 /sq ftor 4 payments of about $22.92 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Free sample · $9.95 flat shipping, up to 3
Product details
Johnsonite Solid Color rubber flooring in Sandalwood brings quiet, slip-resistant performance built for busy commercial floors. From the Solid Color collection by Johnsonite, every detail is designed to hold up to real life.
This is a through-coloured resilient floor built for traffic: rubber takes rolling loads, damps footfall noise and stays comfortable to stand on. There is no finish to strip or re-wax — cleaning is sweeping and a damp mop.
Key features
- Tile size: 24" × 24" (0.13" thick)
- Material: Rubber
- Covers 4 sq ft per box
- FloorScore certified for indoor air quality
- Glues down
Order a sample to see the colour in your own light, or add your square footage above and we'll work out the boxes for you.
- Brand
- Johnsonite
- Collection
- Solid Color
- Colour
- Sandalwood
- Browse category
- Tiles
- Browse sub-category
- Rubber
- Thickness
- 0.125
- Width
- 24
- Length
- 24
- Surface
- Smooth
- Installation
- Glue Down
- Coverage
- 4 sq ft / box
- Weight
- 4.5 lb
- SKU
- 400194066
- Material
- Rubber
- Pattern
- Solid
- Format
- 24" x 24"
- Chemical resistance
- Pass
- Slip resistance
- SCOF ≥ 0.5
- Flammability
- Class 1 (mean average CRF: 0.45 w/sq cm or higher)
- Smoke density
- < 450
- FloorScore certified
- Yes
- TVOC emissions
- ≤ 500 µg / m³
- Commercial warranty (years)
- 5
- Static load limit
- 250 psi, ≤ 0.005"
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.