Kinesik - Ecoglo E30 Photoluminescent Step Edge Contrast Strip with Yellow Anti-Slip Strip 2" (Sold in Linear Feet)
The Accessibility Moldings from Kinesik in Yellow — bridges thresholds and covers expansion gaps for a polished result.
Product details
The Accessibility Moldings from Kinesik in Yellow — bridges thresholds and covers expansion gaps for a polished result.
The E30 Series is designed to reduce falls and enhance egress speed in all egress situations. It also provides a non slip surface on the step. The E30 Series is the high performance product to include in any cost effective solution. E30 step edge is certified to ULC572 and meets AODA requirements for non-slip step edge colour contrast.
With a wider non-slip area than the E20 series, the E30 series is designed to be visible in all lighting conditions.
Key features
- Install with premium polyurethane adhesive
- Option for mechanical fasteners
- Do not use mechanical fasteners when installing outdoors
- Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft
- Brand
- Kinesik
- Collection
- Ecoglo E30
- Colour
- Yellow
- Browse category
- Moldings & Trims
- Browse sub-category
- Accessibility Moldings
- Width
- 2
- Weight
- 1.61 lb
- SKU
- E3051-LF
- Pieces per box
- 1.000000
- Per skid
- 1
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.