Kinesik - Ecoglo F4-E20 Photoluminescent Flat Stair Nosing with Black Anti-Slip Strip 2.7" x 8' (Sold in Linear Feet)
The Accessibility Moldings from Kinesik in Black — gives edges, transitions and stair steps a clean, finished line.
Product details
The Accessibility Moldings from Kinesik in Black — gives edges, transitions and stair steps a clean, finished line.
F4 Series is a right-angled aluminium step nosing for fitting to the edge of steps in public stairways, exit ways and all other applications where pathfinding in darkness is an issue. The Ecoglo F4 Series is designed to be visible for a long period of time after the lights go out to enhance the orderly movement of people. It also provides an extra non-slip surface supplementing the step’s own non-slip properties.
Working just as well in the light as it does in the dark, the flat step nosing is designed to reduce falls and enhance egress speed in all egress situations. The F4 Series flat nosing can also be fitted over steps with an industrial or commercial type carpet (with no underlay) and up to 0.6 inch (6mm)thick.
Key features
- Install with polyurethane adhesive and mechanical fasteners, or adhesive only
- Supplied with pre-drilled holes. Includes stainless steel fasteners and concrete nylon anchors. Standard location is 2" from each end and approx. 12" apart
- Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft
- Inserts Attached or Unattached - Unattached is recommended for on-site cutting. Inserts are installed with a premium polyurethane adhesive
- Piece size: 2.7" × 96"
- Material: Aluminum
- Brand
- Kinesik
- Collection
- Ecoglo F4 Series
- Colour
- Black
- Browse category
- Moldings & Trims
- Browse sub-category
- Accessibility Moldings
- Width
- 2.7
- Length
- 96
- Weight
- 3.52 lb
- SKU
- F4171-LF
- Material
- Aluminum
- Pieces per box
- 1
- Per skid
- 1
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.