Kinesik - Ecoglo RF5-N30 Flat Stair Nosing with Yellow Anti-Slip Strips 5.5" (Sold in Linear Feet)
The Accessibility Moldings from Kinesik in Yellow — gives edges, transitions and stair steps a clean, finished line.
Product details
The Accessibility Moldings from Kinesik in Yellow — gives edges, transitions and stair steps a clean, finished line.
The RF5 Renovation Series is a right-angled aluminum step nosing for fitting to the edge of steps in public stairways, exit ways and all other applications where slip resistance or step edge contrast is an issue. The Ecoglo RF5 series has 2 inserts which both provide 2 inch (51mm) of non-slip surface on the step.
Available with and without photoluminescent, the RF5 step nosing is designed to reduce falls and enhance egress speed.
Key features
- Install with polyurethane adhesive and mechanical fasteners, or adhesive only
- Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft
- Material: Aluminum
- Brand
- Kinesik
- Collection
- Ecoglo RF5 Series
- Colour
- Yellow
- Browse category
- Moldings & Trims
- Browse sub-category
- Accessibility Moldings
- Width
- 5.5
- Weight
- 9.03 lb
- SKU
- RF5150-LF
- Material
- Aluminum
- Pieces per box
- 1.000000
- Per skid
- 1
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No documents available for this product.
No reviews yet for this product. Be the first to review it after your purchase.