Kinesik - Ecoglo RF7C-N30 Flat Stair Nosing with Black Anti-Slip Strips 2.19" (Sold in Linear Feet)
Kinesik's accessibility moldings in Black — bridges thresholds and covers expansion gaps for a polished result.
Buy now
$331.39 /sq ftor 4 payments of about $14.91 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Product details
Kinesik's accessibility moldings in Black — bridges thresholds and covers expansion gaps for a polished result.
Non-Slip Anodized Resilient Nosings are designed to be installed flush with resilient flooring. It provides step edge visibility and enhances egress speed in all light conditions. The RF7C Series has an 85 ° angle.
Key features
- Countersunk pre-drilled holes. Includes stainless steel fasteners and concrete nylon anchors. Standard location is 2" from each end and approx. 12" apart
- Maximum Length : 8'
- Covers 0.18 sq ft per box
- Brand
- Kinesik
- Collection
- Ecoglo RF7C Series
- Colour
- Black
- Browse category
- Moldings & Trims
- Browse sub-category
- Accessibility Moldings
- Width
- 3
- Coverage
- 0.18 sq ft / box
- Weight
- 4.67 lb
- SKU
- RF7C170-08-LF
- Pieces per box
- 1.000000
- Per skid
- 1
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.