Laticrete - Fracture Ban SC Liquid Crack Isolation Membrane 1 gal
Laticrete crack isolation membranes — quiets footsteps and evens out the subfloor beneath your new floor.
Buy now
$1.49 /sq ftor 4 payments of about $18.68 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Product details
Laticrete crack isolation membranes — quiets footsteps and evens out the subfloor beneath your new floor.
FRACTURE BAN SC is easy and quick to apply for any interior or exterior and horizontal tile or stone installation needing antifracture protection. This a thin, load bearing, self-curing, liquid applied rubber polymer that can be easily applied in a single coat to form a flexible seamless anti-fracture membrane.
Applied in a single coat with a paint brush or roller, this rapid drying antifracture membrane allows you to install tile or stone in just 1-2 hours. Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the membrane.
Key features
- Exceeds ANSI A118.12 for anti-fracture protection of up to 1/8” (3 mm), preventing cracks from protruding up through your tile or stone installation
- Rapid drying time allows you to install tile or stone in just 1 to 2 hours
- Does not require the use of fabric which is less time consuming and saves money
- Changes from a light blue to darker blue color when cured to clearly indicate when it is ready to install tile or stone
- “Extra Heavy Service” rating per TCNA performance levels (ASTM C627 Robinson Floor Test) provides you anti-fracture for any tile or stone installation
- Equipped with Microban antimicrobial product
- Covers 50 sq ft per box
- Brand
- Laticrete
- Collection
- Fracture Ban SC
- Browse category
- Underlayment & Heating
- Browse sub-category
- Crack Isolation Membranes
- Coverage
- 50 sq ft / box
- Weight
- 10 lb
- SKU
- 9209-0401-2
- Pieces per box
- 1
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.