Laticrete - L&M EMERYTOP 400 Concrete Topping 25 kg
Laticrete mortars — locks tile and stone down with a strong, reliable bond.
Product details
Laticrete mortars — locks tile and stone down with a strong, reliable bond.
EMERYTOP 400 is a flowable, natural emery aggregate floor topping that produces a long-lasting and resilient floor. It provides an economical, abrasion-resistant solution to very severe and abusive concrete floor conditions where other solutions have failed. EMERYTOP 400 was developed for the solid waste industry's transfer station tipping floors — and are the toughest floors in the world!
The major difference between EMERYTOP 400 and other toppings is how it is chemically engineered to resist chemical attack. EMERYTOP 400 chemically reinforces the cement paste against chemical attack, which doubles the abrasion resistance when compared to other emery toppings and iron toppings.
This synergy between the emery aggregate and the chemically resistant cement paste that gives EMERYTOP 400 its very high abrasion resistance.
Key features
- Greater abrasion resistance
- High energy-absorbing capacity for improved impact resistance
- Non-rusting
- Greater increased resistance to chloride ion penetration
- Modulus of elasticity very similar to concrete for greater compatibility
- Lower drying shrinkage assuring good bond to substrate
- Brand
- Laticrete
- Collection
- EMERYTOP 400
- Browse category
- Setting Materials
- Browse sub-category
- Mortars
- Installation
- Industrial
- Weight
- 55 lb
- SKU
- 9-37-702-1279
- Pieces per box
- 1
- Indoor use
- Yes
- Outdoor use
- Yes
- Use on
- Concrete floor
- Use for
- Topping floors
- Shelf life
- 6 months in unopened bags when properly stored
- Mixing ratio
- 2.5 L of water per 1 bag of 55 lb (25 kg)
- Storage
- Dry storage to prevent water contaminiation
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No documents available for this product.
No reviews yet for this product. Be the first to review it after your purchase.