Laticrete - L&M FGS Plus Hardener 5 gal
Laticrete's coatings. A dependable choice to complete your flooring project.
Product details
Laticrete's coatings. A dependable choice to complete your flooring project.
FGS HARDENER PLUS is a proprietary, chemical hardening solution that is formulated to increase the wear resistance and surface strength of concrete floors that have been mechanically ground, smoothed, and polished.
When used in conjunction with the patented FGS Permashine FLOOR POLISHING PROCESS, FGS HARDENER PLUS penetrates diamond ground and polished concrete wear surfaces to harden, seal, densify, and waterproof them.
Polished concrete floors treated with FGS HARDENER PLUS last longer than conventional concrete floors, cost less to maintain, reflect light better, hold a shine longer, are safe to use, and are guaranteed to resist dusting for a minimum of ten years. FGS HARDENER PLUS is a water-based, Low VOC, odorless and environmentally safe component of this process. "BETTER CONCRETE. BETTER WORLD.".
Key features
- Dramatic long-term maintenance cost reduction
- Safe, non-slip, certified high traction
- Odorless/Low VOC
- Formulated to help resist dusting
- Creates a protective hardened and sealed surface
- Brand
- Laticrete
- Collection
- L&M FGS Plus
- Browse category
- Coatings
- Browse sub-category
- Coatings
- SKU
- 8-04-155-1534
- Use on
- Existing Concrete
- Moisture resistant
- 0.7
- Frost resistance
- Do not allow to freeze. Apply when temperatures are above 40°F (4°C)
- Certifications
- CHPS, Green Globes, LEED and HPD
- Shelf life
- FGS HARDENER PLUS containers are to be stored in a clean, dry area between 40°F and 100°F (4-38°C). Shelf life of FGS HARDENER PLUS in unopened containers is a two years if properly stored
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.