Laticrete - Laticrete 3701 Lite Mortar 30 lb
Laticrete mortars — the mortar and setting base that keeps your installation solid for years.
Product details
Laticrete mortars — the mortar and setting base that keeps your installation solid for years.
3701 Lite Mortar does not need a latex admixture. You will only need to add water to produce thick bed mortar or a vertical repair mortar/screed. It contains no respirable crystalline silica levels that exceed the OSHA action level*. 3701 Lite Mortar weighs half the amount of a conventional thick bed mortar and retains the same coverage.
This product is also available in a quick set mortar (rapid version) with a cure time between 1.5 to 2 hours which allows you to work and complete installations faster.
* OSHA action level set forth in OSHA’s Respirable Crystalline Silica (RCS) standard for construction, 29 CFR 1926.1153, as tested by an independent laboratory to be below the OSHA action level for respirable crystalline silica - see laticrete.com/silica.
- Brand
- Laticrete
- Collection
- 3701
- Browse category
- Setting Materials
- Browse sub-category
- Mortars
- SKU
- 1060-0030-21
- Pieces per box
- 1.000000
- Per skid
- 56
- Commercial warranty (years)
- 5, 10, 25 years system warranty, 1 year product warranty and Lifetime System Warranty (US/CAN)
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No documents available for this product.
No reviews yet for this product. Be the first to review it after your purchase.