Laticrete - Reinforcing Fabric Roll for Liquide Waterproofing Membrane Laticrete 9235 - 6" x 75' (37.5 sqft)
The Waterproofing Membranes from Laticrete — quiets footsteps and evens out the subfloor beneath your new floor.
Buy now
$1.00 /sq ftor 4 payments of about $9.36 with Klarna or Afterpay
Subject to approval. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Need an exact length? Order a custom cut →
Product details
The Waterproofing Membranes from Laticrete — quiets footsteps and evens out the subfloor beneath your new floor.
LATICRETE 9235 Waterproofing Membrane is a thin, load-bearing waterproofing designed specifically for the special requirements of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproofing membrane that bonds to a wide variety of substrates.
Key features
- For use in all field applications using Laticrete 9235 Waterproofing Membrane Liquid
- Can also be used for Corners and Coves when using Laticrete Hydro Ban and Hydro Barrier products
- Covers 37.5 sq ft per box
- Water-resistant — suitable for kitchens and baths
- Brand
- Laticrete
- Browse category
- Underlayment & Heating
- Browse sub-category
- Waterproofing Membranes
- Coverage
- 37.5 sq ft / box
- SKU
- S-09235-NF-19
- Pieces per box
- 1.000000
- Per skid
- 560
- Indoor use
- Yes
- Outdoor use
- Yes
- Use for
- Typical applications are over concrete slabs (suspended or on grade) in malls, lobbies and residential applications under ceramic tile, marble and stone. Use to cover joints in plywood under-layments, cement backer boards, and concrete masonry on floors and walls. And also use over concrete floors and under-layments with radiant heating systems
- Water resistant
- Yes
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.