Laticrete - Stonetech Salt Water Resistant Sealer 3.8 L
The Tile & Grout Sealers from Laticrete in Opaque White — the mortar and setting base that keeps your installation solid for years.
Free sample · $9.95 flat shipping, up to 3
Product details
The Tile & Grout Sealers from Laticrete in Opaque White — the mortar and setting base that keeps your installation solid for years.
STONETECH Salt Water Resistant Sealer is a waterbased, penetrating sealer formulated to protect exterior surfaces from salt degradation due to salt water and deicing salt exposure. This effectively treats porous natural stone, tile, masonry and grout to prevent salt water damage and to minimize efflorescence. Great on steps, walkways and surrounding salt water pools.
Key features
- Maximum protection against salt water and de-icing salt damage
- Protects porous natural stone, masonry and grout
- Weather and UV-resistant
- Water-based formula
- Recommended surfaces: Best suited for porous substrates. Treatment around salt water pools: natural stone, porous tile, concrete pavers, terracotta and grout
- Protection against de-icing salts: poured concrete, aggregate, pavers and flagstone
- Material: Water-Based
- Brand
- Laticrete
- Collection
- Stonetech
- Colour
- Opaque White
- Browse category
- Tiles
- Browse sub-category
- Tile & Grout Sealers
- SKU
- ST364-0401
- Material
- Water-Based
- Pieces per box
- 1
- Outdoor use
- Yes
- Use on
- Floors & Walls · Suitable Substrates : Porous substrates, Porous tile, Natural Stone, Concrete Pavers, Terracotta, Grout, Flagstone, Pavers, Concrete, Masonry and grout
- Use for
- Salt water pools, Walkways and Stairs
- TVOC emissions
- <400 g/L (excluding water) for EPA Purposes 65 g/L (including water)
- Certifications
- HPD
- Cure time
- 72 hours
- Shelf life
- Factory sealed containers of this product are guaranteed to be of first quality for two (2) years if stored at temperatures 90°F (32°C)
- Storage
- Do not freeze or store above 100 °F (38 °C)
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.