Laticrete - Strata Heat WiFi Thermostat 120V/240V
The Thermostats from Laticrete. A quality pick to round out your flooring job.
Product details
The Thermostats from Laticrete. A quality pick to round out your flooring job.
The STRATA_HEAT Thermostats are dual voltage 120V/240V and simple to use; the STRATA_HEAT Programmable Thermostat is a digital programmable thermostat and the STRATA_HEAT Wi-Fi Thermostat can be controlled through smart phone technology. The STRATA_HEAT Thermostats are designed to be used with the STRATA_HEAT Wire whether it is installed with the STRATA_MAT Spacing Strips or the STRATA HEAT Mat.
All electrical connections must be made by a licensed electrician. Failure to do so will void all warranties and claims. Comply with all applicable building and electrical codes. Parts: One (1) power base One (1) Sensor Probe Two (2) screws.
Key features
- Advanced floor control maximizes comfort and energy savings
- 15 A (res.) 60 Hz
- 15 ft. (4.5 m) sensor included
- Easily accessible floor sensor connector
- Built-in GFCI with test light
- 7-day easy to program
- Piece size: 0.85" × 4.72"
- Brand
- Laticrete
- Collection
- Strata_Heat
- Browse category
- Thermostats
- Browse sub-category
- Thermostats
- Width
- 0.85
- Length
- 4.72
- SKU
- 0804-0403-TW
- Pieces per box
- 1
- Commercial warranty (years)
- 1
- Voltage
- 120V / 240V
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.