Laticrete - Vapor Ban Primer ER Epoxy Coating Mini Unit Kit Part A & B - 3 gal
The Epoxy Coating from Laticrete. A quality pick to round out your flooring job.
Buy now
$4.87 /sq ftor 4 payments of about $365.06 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Product details
The Epoxy Coating from Laticrete. A quality pick to round out your flooring job.
A single-coat, 100% solids, liquid applied 2-part epoxy coating specifically designed to control the moisture vapor emission rate from new or existing concrete slabs. It consolidates the application of a moisture barrier and primer from two steps into one. It can be used with any NXT Level and SUPERCAP self-leveling underlayments.
Key features
- Exceeds ASTM-3010, can be applied to concrete up to 100% RH/14 pH
- Reduces MVER ≤25 to below 3 lbs/1000 ft2/24 hrs (170 μg/(s
- Ready for SLU or finished flooring in 3 to 4 hours
- VAPOR BAN ER is a kit of two pails : Individual pails (Part A and Part B)
- Material: Epoxy
- Covers 300 sq ft per box
- 1-year warranty
- Brand
- Laticrete
- Collection
- Vapor Ban Primer ER
- Browse category
- Setting Materials
- Browse sub-category
- Epoxy Coating
- Warranty
- 1
- Coverage
- 300 sq ft / box
- SKU
- 0914-0003-2
- Material
- Epoxy
- Pieces per box
- 1
- Use for
- To control the moisture vapor emission rate from new or existing concrete slabs
- Use with
- NXT Level and SUPERCAP self-leveling underlayments, 254 Platinum, 257 Titanium, MULTIMAX Lite, TRI-LITE, HYDRO BAN and FRACTURE BAN SC
- TVOC emissions
- Low (<100 g/L)
- Mixing ratio
- 3 Part A : 2 Part B by volume
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.