MAC Coatings - Acrylic Floor Sealer MACSEAL-CS25 Clear Glossy 3.79 L
The Coatings from MAC Coatings in Clear. A quality pick to round out your flooring job.
Product details
The Coatings from MAC Coatings in Clear. A quality pick to round out your flooring job.
A clear, high gloss, quick drying cure and seal compound designed to provide a premium seal on freshly poured concrete. The primary function is moisture retention, and it can be applied in any situation where simultaneous curing and sealing is desired. MACSEAL-CS25 can be used as a concrete sealer on old concrete when a soft gloss finish is desired.
When properly applied, this compound reduces the common defects that result from a concrete that has not been properly cured such as dusting, premature cracking, etc. Also provides concrete with protection during construction.
Key features
- Helps concrete achieve desired strength
- Reduces dusting and premature cracking
- Enhances substrate
- 25% solids
- Piece size: 6.5" × 6.5"
- Material: Acrylic
- Glossy finish
- Brand
- MAC Coatings
- Collection
- MACSEAL-CS25
- Colour
- Clear
- Browse category
- Coatings
- Browse sub-category
- Coatings
- Finish
- Glossy
- Width
- 6.5
- Length
- 6.5
- Weight
- 10 lb
- SKU
- CSS-1125-1
- Material
- Acrylic
- Pieces per box
- 1
- Per skid
- 45
- Use on
- Floors
- Use for
- Providing a premium seal on freshly poured concrete
- TVOC emissions
- < 350 g/L
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.