Mapei - Flexcolor CQ Ready-to-Use Grout with Color-Coated Quartz #5007 Chocolate 3.79 L
Mapei's grout in Chocolate — the mortar and setting base that keeps your installation solid for years.
Product details
Mapei's grout in Chocolate — the mortar and setting base that keeps your installation solid for years.
MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/exterior tile, and its dense composition helps to prevent water-based stains by providing water repellency to the grout surface.
MAPEI Flexcolor CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation.
Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient (based on typical rates of installers) and requires 65% less time to install.
Key features
- Stain- and chemical-resistant grout formulation with no sealing required
- Easy cleanability, color consistency and improved workability
- Dries to a hard, uniform color surface in 24 hours and will not stain surfaces
- Crack-resistant and shrinkage-controlled formulation, with no efflorescence
- BioBlock® technology for mold and mildew resistance
- Is used straight from the pail, without the need to add water
- Piece size: 8" × 9.75"
- Brand
- Mapei
- Collection
- Flexcolor CQ
- Colour
- Chocolate
- Browse category
- Setting Materials
- Browse sub-category
- Grout
- Width
- 8
- Length
- 9.75
- Weight
- 14 lb
- SKU
- 50701
- Certifications
- Registration # SCS-IAQ-06041
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.