Mapei - Grout Ultracolor Plus FA #5227 Castle Wall 25 lb
Mapei grout in Castle Wall — the mortar and setting base that keeps your installation solid for years.
Product details
Mapei grout in Castle Wall — the mortar and setting base that keeps your installation solid for years.
Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts. Ultracolor Plus FA with DropEffect technology is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints.
Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT) to eliminate the common problems related to Portland-cement grout, such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.
Key features
- Fine aggregate (FA) allows for narrow joint widths and improved cleanability
- No efflorescence (free of Portland cement)
- Easy to install and stain-resistant
- No sealer required
- Rated for residential and commercial use
- Brand
- Mapei
- Collection
- Ultracolor Plus FA
- Colour
- Castle Wall
- Browse category
- Setting Materials
- Browse sub-category
- Grout
- Installation
- Commercial & Residential
- Weight
- 25 lb
- SKU
- 6BU522711
- Pieces per box
- 1
- Per skid
- 80
- Indoor use
- Yes
- Outdoor use
- Yes
- Use for
- For grouting dimensional stone, slate, granite, stone agglomerates and most types of ceramic, ceramic mosaic, quarry, brick paver, porcelain, glass and clay tiles
- Abrasion resistance
- ≤ 1 000 mm3
- Water absorption
- ≤ 5 g after 4 hours
- TVOC emissions
- Between 0.5 mg/m³ and 5 mg/m³
- Recycled content
- 0.1
- Certifications
- Indoor Air Quality (Advantage Gold) and EPD (In accordance with ISO 14025)
- Cure time
- 3-Day but when installing in submerged jobsites (swimming pools, spas, water features and fountains), allow 72 hours of curing
- Shelf life
- 1 year when stored in original, unopened packaging at 73°F (23°C) in a dry area
- Mixing ratio
- For 25 lb of grout powder: 2.6 to 2.8 U.S. qts. (2.46 to 2.65 L)
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.