Mapei - Mapecem Premix Fast-Setting Screed Mortar - 50 lb
Mapei mortars — locks tile and stone down with a strong, reliable bond.
Product details
Mapei mortars — locks tile and stone down with a strong, reliable bond.
Mapecem Premix is a fast-setting, premixed cement-based mortar for concrete repairs and subfloor preparation work. Mixed exclusively with water, Mapecem Premix provides an easy-to-use, high-compressive-strength, fast-setting mortar that sets completely within 24 hours without shrinkage cracks.
Thanks to MAPEI’s High-Hydrated Cement Technology (HCT™), Mapecem Premix offers superior drying-out characteristics for quick curing and does not contribute to efflorescence. When properly used, Mapecem Premix will allow installation of ceramic tile and natural-stone flooring after only 3 to 4 hours and installation of floor covering (such as vinyl, wood, rubber, linoleum and carpet) after 16 to 18 hours.
Key features
- Repairs concrete from 1/4 to 4 (6 mm to 10 cm)
- Repairs concrete from 1/4" to 4" (6 mm to 10 cm) thick
- Allows tile setting in 3 to 4 hours
- Allows installation of floor coverings in 16 to 18 hours
- Allows installation of floor covering in 16 to 18 hours
- Piece size: 12.25" × 18.5"
- Brand
- Mapei
- Collection
- Mapecem
- Browse category
- Setting Materials
- Browse sub-category
- Mortars
- Width
- 12.25
- Length
- 18.5
- Weight
- 50 lb
- SKU
- 2060021
- Certifications
- Registration # SCS-IAQ-06041
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.