Mapei - Mapelastic Liquid Waterproofing Membrane Part B 7.56 L
Mapei waterproofing membranes — quiets footsteps and evens out the subfloor beneath your new floor.
Product details
Mapei waterproofing membranes — quiets footsteps and evens out the subfloor beneath your new floor.
Mapelastic is a two-component, cementitious membrane that waterproofs concrete and masonry. It also offers protection against chemical attack from de-icing salts, sulfates, chlorides and carbon dioxide. Mapelastic’s specially formulated synthetic resins generate a hardened layer that remains flexible under all environmental conditions.
The dried mortar remains waterproof up to 50 feet (positive side) of hydrostatic head pressure and resists chemical attack from de-icing salts, sulfates, chlorides and carbon dioxide. Mapelastic offers excellent protection to structures in coastal areas exposed to high humidity and salt, as well as those located in heavy industrial areas exposed to aggressive airborne chemicals and pollutants.
Mapelastic is carefully engineered to fully cover hairline and micro cracks evident in placed concrete, and to allow adequate flexibility so that cracks up to 1/32" (1 mm) may be bridged. This specific product engineering ensures that Mapelastic will not conceal structural cracks that develop in concrete structures.
Key features
- Excellent protection against water and aggressive chemicals
- Outstanding bond to horizontal and vertical concrete, masonry and ceramic surfaces
- Remains highly flexible under all environmental conditions
- Suitable for irrigation canals, spillways and dams, as well as for balconies, suspended walkways and patios
- Tested per CAN/ULC-
- Brand
- Mapei
- Collection
- Mapelastic
- Browse category
- Underlayment & Heating
- Browse sub-category
- Waterproofing Membranes
- Weight
- 19.84 lb
- SKU
- 6um999931
- Pieces per box
- 1
- Outdoor use
- Yes
- Use on
- Walls
- Use for
- Waterproofing and protecting concrete or masonry
- Shelf life
- 1 year when stored in original, unopened packaging at 73°F (23°C)
- Mixing ratio
- 1 Part A to 1 Part B
- Storage
- Store in a dry place at a temperature of at least 41°F (5°C).
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No documents available for this product.
No reviews yet for this product. Be the first to review it after your purchase.