Mapei - Ultraflex 1 Polymer-Modified Mortar, Gray - 50 lb
Mapei mortars in Gray — locks tile and stone down with a strong, reliable bond.
Product details
Mapei mortars in Gray — locks tile and stone down with a strong, reliable bond.
Ultraflex 1 is a single-component, polymer-modified, thin-set mortar for interior and exterior installations of dimensional stone, ceramic, porcelain and quarry tile. This mortar has an above-average content of a unique dry polymer, resulting in good adhesion to the substrate and tile. Ultraflex 1 can be used for both interior and exterior installations of tile in most residential floor and wall applications.
In commercial applications, use on interior floor and wall installations and exterior floors. For exterior commercial wall applications, we recommend using either the Kerabond/Keralastic™ or Granirapid® systems. Ultraflex 1 meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water.
Key features
- Polymer-enriched for performance
- Good bond strength with plywood
- Piece size: 12.25" × 18.5"
- Brand
- Mapei
- Collection
- Ultraflex 1
- Colour
- Gray
- Browse category
- Setting Materials
- Browse sub-category
- Mortars
- Width
- 12.25
- Length
- 18.5
- Weight
- 50 lb
- SKU
- 006004821
- Certifications
- Registration # SCS-IAQ-06041
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.