Pearl Abrasive - P5 Resin Bond Glass Tile Blade, 10mm Rim 7" x 0.062" x 5/8"
Pearl Abrasive miscellaneous saw blades & accessories — the right tool to make installation faster and cleaner.
Free sample · $9.95 flat shipping, up to 3
Product details
Pearl Abrasive miscellaneous saw blades & accessories — the right tool to make installation faster and cleaner.
The glass tile blade with resin bond is chip-free cutting with resin bond diamond blade. The Resin Bond diamond blades offer superior cut quality over other diamond blades. They are essential in applications that require a smooth finish and minimal chipping. NOTE: Resin Bond blades should never be used at rpms higher than the maximum rpm shown on Pearl literature and blades.
Please check your saw before installing the blade. Pearl tile saws operate at the correct rpms for Resin Bond blades. These blades are more susceptible to impact damage than standard metal bond blades. Extra care should be taken to protect the blades when mounting, operating or storing. Always supply sufficient amount of water to keep the blade cool. Misting or table water feeds are not sufficient.
When cutting, gently feed the tile through the cut. Do not force.
Key features
- Resin Bond diamond blades offer superior cut quality over other diamond blades
- They are essential in applications that require a smooth finish and minimal chipping
- Supreme-grade resin bond for production glass cutting and to eliminate breakout when cutting glass tiles or glass tubing
- Chip-free cutting, precise and smooth finish
- Wet cutting
- 7", 8" and 14" - 7mm rim
- Tile size: 6.69" × 6.69"
- Brand
- Pearl Abrasive
- Collection
- P5
- Browse category
- Tiles
- Browse sub-category
- Miscellaneous Saw Blades & Accessories
- Width
- 6.688
- Length
- 6.688
- Weight
- 0.5 lb
- SKU
- DTL07RBG
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No documents available for this product.
No reviews yet for this product. Be the first to review it after your purchase.