Pliteq - Acoustic Underlayment GenieMat RST 4' x 75' - 2 mm (300 sqft)
The Acoustic Underlayment from Pliteq — quiets footsteps and evens out the subfloor beneath your new floor.
Buy now
$0.63 /sq ftor 4 payments of about $47.08 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Product details
The Acoustic Underlayment from Pliteq — quiets footsteps and evens out the subfloor beneath your new floor.
GenieMat RST is a flat, resilient, reduced sound transmission mat made from 94% recycled rubber content, used directly under hard surface floor finishes and over concrete and wood construction. It is used when superior sound control is required in multi-family housing, high-rises, or commercial buildings and protects ceramic tile, porcelain and stone from substrate cracks.
Engineered for direct adhered floor coverings such as tile, stone, wood, and vinyl floor coverings. Tile – All products rated for minimum of commercial use. Wood – GenieMat FAS adhesives offer superior bonding strength. Vinyl – One-step method provides superior sound control for resilient floor coverings.
Key features
- Mold, bacteria, fungi, and water resistant
- Exceeds pass criteria for point load test for crack isolation membrane (ANSI 118.12)
- Meets requirements for VOC emissions (IAQ test, ASTM D5116)
- Qualifies for LEED points
- Floorscore certified
- Complete floor covering system warranty available
- 0.08" overall thickness
- Material: Rubber
- Brand
- Pliteq
- Collection
- GenieMat RST
- Browse category
- Underlayment & Heating
- Browse sub-category
- Acoustic Underlayment
- Thickness
- 0.08
- Width
- 48
- Installation
- Extra Heavy Commercial
- Coverage
- 300 sq ft / box
- Weight
- 120 lb
- SKU
- RST02
- Material
- Rubber
- Pieces per box
- 1
- Per skid
- 16
- Impact sound (IIC)
- 50-61
- Sound transmission (STC)
- 55-61
- Recycled content
- 94%
- LEED
- Qualified
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.