Progress Profiles - Slim Trim Procover Polished Brass (9 mm) 11/32" x 25/32" x 8' 10-5/16"
The Metal Molding from Progress Profiles in Yellow — bridges thresholds and covers expansion gaps for a polished result.
Product details
The Metal Molding from Progress Profiles in Yellow — bridges thresholds and covers expansion gaps for a polished result.
Procover is a joint-cover profile in polished, chromed and antique brass. It is applied at the end of laying two adjoining floors with the same height, having left a 6 - 24 mm gap between the two floors set in a thin bed of adhesive. It protects the outside edges of the floor/covering. It is easy to lay and attractive.
The design of the profile with lower vertical arrowhead part allows excellent anchorage with the silicone/adhesive.
- Brand
- Progress Profiles
- Collection
- Procover
- Colour
- Yellow
- Browse category
- Moldings & Trims
- Browse sub-category
- Metal Molding
- Finish
- Polished
- Weight
- 8.8 lb
- SKU
- PCROL-209
- Material
- Brass
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.