QEP - LASH Tile Leveling System, Part A, Clips for 1/8" Grout (100 pack)
The Tile Spacers from QEP in Red — a job-site essential for a professional-looking install.
Free sample · $9.95 flat shipping, up to 3
Product details
The Tile Spacers from QEP in Red — a job-site essential for a professional-looking install.
Install tile with professional results while saving time with QEP LASH Tile Leveling Clips. Level, Align, Space and Hold tile in place to prevent lippage, ensure a consistent finish and correct tile bowing. The Clips, Part A of a two-part system, produce even grout lines and raise neighboring tile of the same thickness for a level finish.
The Wedges, Part B, hold the tile at an even height for lippage-free results (sold separately). The QEP LASH Clip and Wedge Tile Leveling System is used by professional and DIY installers alike to save time while providing a level and consistently spaced tile wall or floor.
For quick and easy removal, the single-use Clips are designed to break off below the surface of the tile with a kick or strike of a floor mallet, while Wedges can be saved and reused.
Key features
- Produces 1/8" tile grout lines
- Use with LASH Wedges (sold separately) to Level, Align, Space and Hold (LASH) during tile installation to ensure consistent spacing and an even surface
- For leveling tiles between 1/4" and 7/16" thick
- May be combined with regular tile spacers for wider joints - up to 1/4"
- Compatible with all tile types, such as porcelain, ceramic, marble and natural stone
- Designed to break off below the surface of the tile for quick and easy removal
- Material: Polymer
- Brand
- QEP
- Collection
- The Original LASH
- Colour
- Red
- Browse category
- Tiles
- Browse sub-category
- Tile Spacers
- Weight
- 1.1 lb
- SKU
- 99781
- Material
- Polymer
- Pieces per box
- 100
- Use on
- Floor & Wall
- Use for
- Faster installation
- Use with
- Large-format rectified porcelain, thin porcelain tile, marble and stone where narrow grout joints are required · Thinset mortars applied with a square trowel notch 1/4" or larger
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.