Roberts - Carpet and Vinyl Transitional Pressure Sensitive Adhesive 6399 - 4 gal
The Multi-Purpose Adhesives from Roberts — holds your flooring firmly and permanently in place.
Product details
The Multi-Purpose Adhesives from Roberts — holds your flooring firmly and permanently in place.
ROBERTS 6399 Firm Set Transitional Pressure Sensitive Adhesive is formulated for installation of resilient flooring including Luxury Vinyl Tile (LVT), Luxury Vinyl Plank (LVP), and Vinyl Composite Tile (VCT), as well as Carpet Tile.
This is a very aggressive, high-tack transitional adhesive with superior shear strength and high resistance to lateral forces, making it ideal for heavy traffic, with great performance under rolling loads. ROBERTS 6399 installs like a pressure-sensitive adhesive, and firms as it cures to form a permanent bond. Used as a pressure sensitive adhesive, it has a 60 minute open time and a 12-hour working time.
For semi-wet installation, it has a 20 minute open time and a 40 minute working time. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. Easy to clean it dries clear, has high resistance to moisture with low odor and VOC (<1g/L). It is FloorScore and CRI Certified.
Key features
- 99% RH, MVER 12
- Acrylic PSA Moisture Control Firm Set Transitional Pressure-Sensitive Adhesive
- Concrete, primed Gypsum, cement backerboard and
- FloorScore certified for indoor air quality
- Brand
- Roberts
- Collection
- 6399 Pressure Sensitive Adhesive
- Browse category
- Vinyl
- Browse sub-category
- Multi-Purpose Adhesives
- SKU
- 6399RB015
- Pieces per box
- 1
- Indoor use
- Yes
- Outdoor use
- No
- Antimicrobial
- Yes
- FloorScore certified
- Yes
- Cure time
- 24 - 48 hours
- Shelf life
- 2 years from date of manufacture when stored in the original unopened container in a controlled environment. Does not require thinning
- Storage
- While this product is freeze-thaw stable, it is necessary to protect it from freezing. Freeze/thaw stable to 20°F (-6.7°C)
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.