Schluter - BEKOTEC-F Studded Screed Panel Polystyrene 29/32" (23 mm) x 35-7/16" x 47-1/4" (Pack of 10)
Schluter grout — locks tile and stone down with a strong, reliable bond.
Buy now
$36.74 /sq ftor 4 payments of about $106.84 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Product details
Schluter grout — locks tile and stone down with a strong, reliable bond.
The Schluter-BEKOTEC family of products creates continuous lightweight modular toppings without reinforcement or control joints, as well as radiant heated floor assemblies.
Key features
- Produces permanent, internally stress-free assemblies by confining contraction and curing forces to smaller modules
- Controls deformations, such as warping and cracking, common in conventional screeds
- 29/32" (23 mm) thick polystyrene foam screed panel
- Piece size: 47.25" × 35.44" (0.91" thick)
- Material: Polystyrene
- Covers 11.63 sq ft per box
- Brand
- Schluter
- Collection
- BEKOTEC-F
- Browse category
- Setting Materials
- Browse sub-category
- Grout
- Thickness
- 0.91
- Width
- 47.25
- Length
- 35.44
- Coverage
- 11.63 sq ft / box
- Weight
- 52.11 lb
- SKU
- EN23F10
- Material
- Polystyrene
- Pieces per box
- 10
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No documents available for this product.
No reviews yet for this product. Be the first to review it after your purchase.