SKU EVDI518AE
Schluter · DIADEC
Schluter - DIADEC Outside Corner 90° - Aluminum Anodized Matte
$40.47/ each
Schluter's corners — gives edges, transitions and stair steps a clean, finished line.
Quantity
1
× $40.47 / eachProduct details
Schluter's corners — gives edges, transitions and stair steps a clean, finished line.
Schluter-DIADEC is an anodized aluminum profile for finishing and protecting the edges of exterior corners of tiled surfaces. The visible surface of the profile forms a 45° bevel.
Key features
- 45° bevelled angle
- Prevents chipping of tile edges
- Integrated spacer creates a uniform joint between tile and profile
- Exterior corner pieces can be used with all sizes of DIADEC profiles
- Material: Anodized Aluminum
- Matte finish
- 5-year warranty
MatteGlue-down
- Brand
- Schluter
- Collection
- DIADEC
- Browse category
- Corners
- Browse sub-category
- Corners
- Finish
- Matte
- Edge
- Beveled
- Warranty
- 5
- Weight
- 0.02 lb
- SKU
- EVDI518AE
- Material
- Anodized Aluminum
- Indoor use
- Yes
- Profile
- Finishing and edge protection profile
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.
You might also like
Ardex
Ardex - UP 331-21 ProFin 90-Degree Aluminum Corner
$99.70 /each
Prova
Prova - Dual-Purpose Aluminum Square Corner, Satin Titanium - 5/16"
$12.19 /each
Prova
Prova - Dual-Purpose Aluminum Square Corner, Bright Clear - 3/8"
$9.71 /each
Prova
Prova - Dual-Purpose Aluminum Square Corner, Bright Clear - 1/2"
$9.62 /each
Forbo
Forbo Preformed Convex Corner with 20 mm Radius Colorex Etna 4" (Pack of 5)
$231.04 /each
Schluter
Schluter - DESIGNBASE-SL Inside Corner 90° - Aluminum Brushed Stainless Appearance 2-3/8" (60 mm)
$14.03 /each
Schluter
Schluter - DESIGNBASE-SL Outside Corner 90° - Stainless Steel (V2) Brushed 4-3/8" (110 mm)
$79.66 /each
Schluter
Schluter DILEX-AHK Round Outside Corner 90° with 3/8" Radius Anodized Aluminum Polished Copper
$33.97 /each