Schluter - DILEX-AHKA Inside Corner 90° with 3/8" Radius for Cove-Shaped Profile Anodized Aluminum Satin
Schluter's corners in Gray — matches your floor to trim out doorways, edges and stairs.
Product details
Schluter's corners in Gray — matches your floor to trim out doorways, edges and stairs.
Schluter-DILEX-AHKA is an anodized aluminum, cove-shaped profile for transitions between walls to be tiled and previously finished floors. The profile features a single trapezoid-perforated anchoring leg that is secured in the mortar bond coat and a dovetailed channel, which can be bonded to floor surfaces using Schluter-KERDI-FIX, epoxy resin, silicone, thin-set mortar, etc.
A 3/8" (10 mm) radius cove section forms the visible surface and prevents the accumulation of dirt, making cleaning simple. DILEX-AHKA prevents surface water penetration and meets the maintenance and hygienic requirements of commercial kitchens, bathrooms, and food-processing plants, or any tiled environment where a sanitary cove base is desired.
DILEX-AHKA integrates with the DILEX-AHK and Schluter-RONDEC profiles at 90° inside and outside vertical wall corners, respectively. Accessories for DILEX-AHKA include 90° and 135° inside and outside corners, and end caps.
Key features
- Eliminates the need for caulking
- Features a single trapezoid-perforated anchoring leg that is secured in the mortar bond coat and a dovetailed channel which is bonded to floor surfaces
- Features a 3/8"(10 mm)-wide radius to prevent water penetration and dirt accumulation, making cleaning simple
- Ideal for tiled environments with high sanitary requirements, such as commercial kitchens, b
- Material: Anodized Aluminum
- Matte finish
- 5-year warranty
- Brand
- Schluter
- Collection
- DILEX-AHKA
- Colour
- Gray
- Browse category
- Moldings & Trims
- Browse sub-category
- Corners
- Finish
- Matte
- Width
- 0.56
- Warranty
- 5
- Weight
- 0.01 lb
- SKU
- I90/AHKA/AE
- Material
- Anodized Aluminum
- Pieces per box
- 1
- Indoor use
- Yes
- Use for
- Tile
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.