Schluter - DILEX-BWA Perimeter Joint Profile with a CPE movement zone of 3/16" PVC Plastic Grout Grey 3/16" x 8' 2-1/2"
The Movement Joint from Schluter in Grout Grey. A quality pick to round out your flooring job.
Product details
The Movement Joint from Schluter in Grout Grey. A quality pick to round out your flooring job.
Schluter-DILEX-BWA features a trapezoid-perforated anchoring leg, made of recycled rigid PVC, which is secured in the mortar bond coat, and a dovetailed channel, made of recycled rigid PVC, which can be bonded to fixed building elements (e.g., door and window frames, bathtubs and shower trays, countertops, etc.) using Schluter-KERDI-FIX, epoxy resin, silicone, tile adhesive, etc.
The profile isolates the tile covering from the structure and accommodates movement via the 3/16” -wide soft chlorinated polyethylene (CPE) movement zone, which also forms the visible surface. The lower CPE movement zone is slit to maximize the absorption of movement. DILEX-BWA also prevents sound bridges, making it ideal for transitions in sound-rated floors.
Key features
- Available in four new colors to simplify the selection of a matching grout
- Designed to allow movement and reduce stress in large, tiled areas
- Eliminates the need for caulking
- Prevents cracking and delamination of tiles
- Ideal for applications such as bathtubs, shower trays, and door and window frames
- Features a dovetailed channel made of rigid PVC that can be bonded to fixed building elements
- Piece size: 1.19" × 98.5"
- Material: PVC Plastic
- Brand
- Schluter
- Collection
- DILEX-BWA
- Colour
- Grout Grey
- Browse category
- Moldings & Trims
- Browse sub-category
- Movement Joint
- Width
- 1.19
- Length
- 98.5
- Warranty
- 5
- Weight
- 0.35 lb
- SKU
- BWA60FG
- Material
- PVC Plastic
- Pieces per box
- 1
- Indoor use
- Yes
- Use on
- Floor & Wall
- Use for
- To Allow movement and reduce stress in large, tiled areas · Bathtubs, Shower Trays & Door/Window Frames
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.