Schluter - DILEX-FIS Surface Movement Joint Silicone Inlay Dark Anthracite 1/8" x 100'
Schluter's schluter - dilex-fis surface movement joint silicone inlay dark anthracite 1/8" x 100'. A dependable choice to complete your flooring project.
Product details
Schluter's schluter - dilex-fis surface movement joint silicone inlay dark anthracite 1/8" x 100'. A dependable choice to complete your flooring project.
Schluter-DILEX-F is a surface movement joint profile. The two-part system consists of a carrier profile with anchor legs made of rigid, recycled PVC, and a slim replaceable silicone inlay that mimics grout lines. When installed, it blends into any tile field for a seamless visible surface.
The carrier profile (DILEX-FCS) has a protective cover that is removed after tile installation and replaced with the selected color of silicone inlay (DILEX-FIS). The inlay is approximately 1/8" (3 mm) wide when installed.
Key features
- Designed to allow movement and expansion in large, tiled floor installations
- The trapezoid-perforated anchoring legs transfer movement to the profile movement zone
- Suitable for residential to medium-sized commercial applications subject to light mechanical loads (e.g., offices and stores)
- Eliminates the need for caulking
- The special silicone inlay is equipped with anti-stretch properties and a low-friction coating that repels dust
- Available in 10 colors to match popular grout choices
- Material: Silicone
- 5-year warranty
- Brand
- Schluter
- Collection
- DILEX-FIS
- Colour
- Dark Anthracite
- Width
- 0.38
- Installation
- Residential and Commercial
- Warranty
- 5
- Weight
- 1.42 lb
- SKU
- FIS300DA
- Material
- Silicone
- Pieces per box
- 1
- Indoor use
- Yes
- Outdoor use
- No
- Use on
- Floors
- Use for
- To allow movement and reduce stress in large, tiled areas
- Use with
- DILEX-FCS
- Traffic rating
- Residential & medium-duty commercial applications subject to light mechanical loads
- Includes
- Specialized installation tool
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.